Click To Call(656) 254-5516Click To Get A Free Estimate
Stiff brush and a gloved hand scrubbing a brick pattern paver surface, with a clean strip beside a mossy one

Wash the grime away and refill every joint

Paver Cleaning and Joint Sand in Plant City, FL

Call (656) 254-5516 to have a local contractor wash your Plant City pavers and pack the joints with fresh sand.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5516

Can I get my pavers cleaned in Plant City without a long wait?

A local contractor cleans pavers in Plant City, FL, and you will hear back within 1 business day, usually much sooner. New joint sand is part of the job, and the free estimate carries no pressure to book. To start, call (656) 254-5516.

Cleaning lifts the algae, dirt and stains that dull pavers in this humid corner of Hillsborough County, so the surface looks brighter and grips better. Fresh sand then settles between the pavers, which holds them steady and leaves weeds less room. A side path that went green by August can look like part of the yard again. Point out the roughest spots when you ask for a free estimate.

Call (656) 254-5516

Gloved hand with a stiff brush on a paver walkway, one strip clean and the next one covered in moss

What is part of a paver cleaning job?

The work covers treatment of growth and stains, a careful wash and new joint sand after the surface dries. It can be a stand-alone job or the opening stage of a sealing job. Shady paths and spots near sprinklers take the longest. To line up a cleaning, call (656) 254-5516.

Growth and stain treatment

A product matched to the problem, whether algae, oil, rust or tannin, goes on first and is tried on a small spot.

Controlled wash

The surface is washed in sections at a pressure that leaves the sand in the joints.

Fresh joint sand

Dry sand is brushed into every gap and settled, so the pavers lock together again.

Sealer if you want it

A coat of sealer can be added after the surface has dried all the way. The sealing guide covers what it adds.

What are the signs my pavers need cleaning?

Signs include a green or black film along shady edges, dark streaks, weeds in the joints, white patches on newer pavers and sand on the drive after rain. Algae is the main worry, because a slick walk or pool deck can lead to a fall. To have yours looked at, call (656) 254-5516.

Is cleaning enough, or should I seal my pavers too?

Cleaning restores how the pavers look today, and a coat of sealer helps that look last. Stopping at a wash costs less now, but algae, stains and fading return on their own schedule. A coat makes later washes easier, though it needs renewing every few years. If sealer is wanted as well, mention it when you ask for a free estimate.

How often should Plant City pavers be cleaned?

Family Handyman says shady, wooded spots may need a thorough cleaning about once a year, and sunny pavers may go a few years. Pavers beside pool screens or sprinklers around Plant City may want attention sooner, since the area averages about 56 inches of rain a year. To set up a cleaning plan for your property, call (656) 254-5516.

Does more pressure clean pavers better?

No. Extra force pulls sand out of the joints and can scar the surface, and fresh sand then has to go back in. Family Handyman also warns against muriatic acid, which can damage pavers. Ask what pressure and what product the contractor plans to use before you ask for a free estimate.

Method counts as much as the machine. A surface cleaner held at an even height leaves an even finish, and a treatment chosen for each stain does the heavy work. To ask about the method now, call (656) 254-5516.

Stains

What are the brown and orange marks on my pavers?

Often oak tannin from fallen leaves or hard water from sprinklers, both of which Rusty's Pro Wash and Seal lists as common stains in Tampa Bay. Rust shows up as orange. Each needs its own treatment, and all of it has to come off before any sealer goes on. Point out the marks when you ask for a free estimate.

Why choose us

Why are white patches showing on newer pavers?

A chalky white film on newer pavers is most likely efflorescence, a calcium salt deposit. Unilock says it is harmless and temporary, that rain may not clear deep deposits and that sealing should wait 2 to 3 months, or up to a year. It can return where water keeps getting in. Not sure whether it is haze or old sealer? Mention it when you call (656) 254-5516.

How long do pavers need to dry before sealing?

A Plant City company says 24 to 48 hours of dry time before sealing, and Rusty's Pro Wash and Seal says the surface must be fully dry. Rain stretches that out, which is why a wash and a seal are often on separate days. Ask what happens if rain is forecast when you ask for a free estimate.

Surfaces

Which paved areas can be cleaned at a Plant City home?

A wash works on drives, pool decks, patios and front walks. Each collects its own kind of dirt, so the product and the method vary. To start with yours, ask for a free estimate.

Driveways

A driveway takes tires, oil and the longest hours of sun. Cleaning it evens out the color and keeps the joints full where the wheels roll.

Pool decks and lanais

Splash, bare feet and constant moisture wear a pool deck in their own way. Cleaning a deck should leave it with grip when wet.

Patios and fire pit areas

A shaded patio stays damp, so green growth starts early there. Cleaning a patio begins with those mossy corners.

Walkways and front steps

Mulch, loose soil and planter runoff settle on a front walk first. Cleaning it is a small job, but it is the first thing a guest steps on.

Common problems

What leaves Plant City pavers dirty?

Sand loss after rain, algae in shade, sun fade, oak and sprinkler stains and white haze lead the list. Washing takes care of some of these, while sealing or repairs deal with the others. To check which fit your house, call (656) 254-5516.

1. Sand washed out by summer rain

Plant City gets about 56 inches of rain in an average year, and Rusty's Pro Wash and Seal says summer rain erodes joint sand. When the joints run low, pavers shift and weeds root in, so sand goes back before any coat.

2. Green growth in shade and around pools

Humidity feeds mold, mildew and algae, and Rusty's Pro Wash and Seal singles out pool decks and shaded areas. A slick patch near a pool is a safety problem, not only a looks problem.

3. Color loss from year-round sun

Strong sun fades unsealed pavers across Tampa Bay, and a driveway with no shade goes first. A wash shows what color remains, and sealing afterward helps keep it.

4. Stains from oak leaves and hard water

Rusty's Pro Wash and Seal lists oak tannin and hard water from sprinklers among the usual stains here. They need a treatment first, because sealer locks a stain in.

5. White haze on newer pavers

Unilock explains that efflorescence is a calcium salt deposit that is harmless and temporary, and that pavers should wait 2 to 3 months, or up to a year, before sealing. Saltwater pools can speed it up.

Pricing

What does paver cleaning cost in Plant City?

Cleaning is priced with the rest of the job. Rusty's Pro Wash and Seal lists $1.25 to $2.50 per square foot in Tampa Bay for the full clean, sand and seal, and a 600 square foot driveway then runs about $750 to $1,500. The wash and the sand are part of that figure, and the sealer is the rest. For a price on your property, ask for a free estimate.

Ask for the wash and the sealer on separate lines, so you can see what each part costs and choose. Small jobs often hit a minimum charge of $500 to $1,000. For help comparing bids, call (656) 254-5516.

Thinking about protection too? Read the sealing guide, see which areas are covered or go to the home page to begin.

Paved areaTypical exampleFull clean, sand and seal
500 sq ftWalkway and entry$625 to $1,250
1,000 sq ftLarge driveway$1,250 to $2,500
2,000 sq ftDriveway and pool deck$2,500 to $5,000

The last column uses the $1.25 to $2.50 per square foot range Rusty's Pro Wash and Seal publishes for Tampa Bay. No page read for this site gives a separate per foot price for a wash alone, so ask for the wash and the sealer on separate lines. On small jobs, a minimum charge of $500 to $1,000 can set the price.

Get a Free Estimate

Family with a small child at the edge of a screened pool, paver decking around them
Why choose us

Why use a contractor who works near Plant City for paver cleaning?

A contractor who works in eastern Hillsborough County knows what humidity, oak shade and sprinkler water leave behind. Compare the quote with the published range on this page and decide at your own speed. To begin, ask for a free estimate.

Contractors who know this ground

A contractor who covers eastern Hillsborough County already works in this sun, this rain and this sandy soil. Your first visit starts from experience, not guesses.

A quote that costs nothing

Looking at your pavers and writing the price costs you nothing. If the number does not fit, say no and the matter ends there.

Real numbers to hold a bid against

Tampa Bay paver companies publish their rates per square foot, and this site passes the range along. If a bid lands well outside it, ask why.

You set the pace

Take your time with the price. See the contractor standards page for what to confirm before signing.

Want a free estimate to clean your Plant City pavers?

Use the short form or call. A contractor answers in 1 business day, often earlier.

Call (656) 254-5516

Free, no obligation

Contractor with a tablet going over a cleaning plan with a couple on their driveway
Photos

What do cleaned pavers look like around Plant City?

Freshly sealed paver driveway on a Plant City area property
Sealed paver pool deck on a Plant City area property
Sealed paver patio behind the home on a Plant City area property
Sealed paver walkway to a front door on a Plant City area property
Close view of freshly sealed pavers on a Plant City area property
Paver area with one cleaned half beside a dirty half on a Plant City area property
Contractor cleaning pavers on a Plant City area property
Contractor sealing or sanding pavers on a Plant City area property
How it works

How does the paver cleaning process go, step by step?

If you skip sealer, the job stops at step four once the joints are full. To set a date, call (656) 254-5516.

1. Measure and inspect

To price the cleaning job, the contractor measures the area and marks sunken spots, cracked pavers, old sealer and places where water stands.

2. Cover and wash

Plants and screens get covered and the sprinkler timer is paused. A surface cleaner and a mold and algae treatment go over the pavers, kept at a pressure that leaves the sand in the joints.

3. Treat the stains

Oil, rust and tannin each get a product made for that stain, tried on a small spot first. Family Handyman warns against muriatic acid, which can damage pavers.

4. Refill the joints

Once the pavers are dry, sand goes back in. Where polymeric sand is already there, Family Handyman says to match it with polymeric sand and mist it to set.

5. Seal and walk the job

If sealer is part of the order, it goes on a dry surface with a pump sprayer and a roller to even it. Rusty's Pro Wash and Seal puts foot traffic at about 24 hours and cars at 48 to 72, and the contractor confirms the times for the product used.

Questions

Frequently Asked Questions

How do I clean my outdoor pavers?

A contractor starts by treating the green and dark growth, then washes in sections at a pressure that leaves the sand in the joints. Oil, rust and tannin get products made for them. Fresh sand goes in once everything is dry.

How do I make my pavers look new again?

Cleaning brings back the color that is left, fresh joint sand tightens the surface and a coat of sealer deepens the tone and slows fading. Which steps you need depends on how worn the surface is. A contractor can tell you after a look.

Can I use Dawn dish soap to clean my pavers?

Family Handyman lists it for light stains only. Algae, oil and rust need cleaners made for them, and leftover residue under a sealer can cause trouble. Ask the contractor which product they use on your surface.

Is it a good idea to pressure wash pavers?

Yes, when the pressure stays controlled and the joints get refilled afterward. A blast at full force pulls out sand and can scar softer pavers. Ask which pressure setting and tool the contractor will use.

How often do you need to reseal pavers in Florida?

Companies commonly say every three to five years, and Rusty's Pro Wash and Seal puts a full-sun driveway near three. A Plant City washing company quotes one to three years. Cleaning without sealing carries no coat to renew.

How much does it cost to get pavers sealed?

Rusty's Pro Wash and Seal lists $1.25 to $2.50 per square foot in Tampa Bay for cleaning, sand and sealer together. A 600 square foot driveway comes to about $750 to $1,500. Minimum charges of $500 to $1,000 may apply on small jobs.

Can concrete pavers be stained?

Yes. Oil, rust, tannin from oak leaves and hard water from sprinklers can all mark concrete pavers. Rusty's Pro Wash and Seal lists the last two as common around Tampa Bay. Stains are treated before sealing, because sealer locks them in.

Why do pavers in Plant City turn green so quickly?

Humidity, shade and wet spots keep the surface damp, and that is all algae needs. Rusty's Pro Wash and Seal names pool decks and shaded areas as the usual trouble spots. Cutting back shade and fixing sprinkler spray can help.

How soon can a contractor clean pavers in Plant City?

The estimate is free, and the reply from a local contractor arrives within 1 business day, usually much sooner. The wash date then depends on the weather, since pavers must dry before joint sand goes in.

Ready for clean, even pavers again?

Use the phone or the short form. The reply comes inside 1 business day, usually much sooner.

Call (656) 254-5516

Free, no obligation